In today’s environment, technology is a must, and Windows is a critical facilitator and supporter. It keeps us connected to the outside world while also allowing us to complete tasks with the push of a button. With continuous updates and new features, as well as the release of new versions, Windows has become one of the most widely used systems. Windows 10 is one of the most recent versions that everyone enjoys using for their daily and critical tasks. Today we will discuss how to fix KMode Exception Not Handled Error?
However, as fantastic and quick as it is with more perks, traits, and skills, it also has some drawbacks and defects.
Is it a common error?
Not Handled KMode Exception!
This is a simple Windows 10 error in which you get a blue screen on your device owing to a defective driver. When the error reappears, your computer will restart, leading it to begin again, and so on.
While it’s annoying and infuriating, the good news is that you don’t need a computer specialist to solve it. You can resolve the problem yourself by following a few simple actions and returning to the task at hand.
Are you curious as to what they are? Here we go –
Disabling Fast Start-up is an option
It’s a short-term solution. Your device is back to normal after a few simple steps.
- Go to your device’s ‘control panel.’
- Select ‘System and security from the drop-down menu. That can be accessed.
- Locate and select the power options in that window.
- After you’ve found the power options, look for the option that says “Choose what power buttons do.”
- Once you’ve done that, you’ll see an option to adjust the default settings.
- In those options, locate the option labeled “Turn on rapid start-up” and uncheck the box to disable it.
- Will you save the modifications and close the control panel after you’ve completed all of these steps?
This step will most likely solve your problem, but if it doesn’t, there are a few additional simple solutions you can try.
Drivers can be cured by updating them
Older drivers with outdated features and versions may cause errors and prevent devices from booting up properly, resulting in the KMode Exception Not Handled error. As a result, updating the aforementioned drivers may assist in resolving the problem.
Important: Before beginning the update process, make sure your device is in safe mode.
It’s also crucial to determine which drivers are causing the problem, so don’t worry! While the BSOD screen is displayed, Windows provides a hint as to which driver may be causing the problem.
The message “Error: Kmode Exception Not Handled” appears on the screen, followed by the name of the offending drive-in brackets.
The simplest technique to reboot the machine is to interrupt the process three times. This procedure entails pressing the power off button for 3-4 seconds in the middle of the booting up process to turn the device off.
The device will begin to fix itself after the fourth time. Select the advanced settings on the screen and troubleshoot from there.
Restart the device by pressing 4 on your keyboard under the start-up settings from the advanced options. Press 4 again throughout the restart procedure, and the device will boot into safe mode.
After that, all you have to do is –
- Press the ‘Window key + X’ key to bring up the context menu.
- Select the device manager from the list.
- In the device manager, look for other devices.
- If the appropriate drive is not available, look into unknown devices.
- Right-click on that option and select Update Driver Software from the menu.
- Restart your computer as soon as the drivers have been fully updated.
This approach is slightly longer and more complicated than the previous one, but it should effectively cure all of your device’s difficulties with the KMode Exception Not Handled error.
Wait for Windows to repair the RAM
If your device is still having issues after using both of the above procedures, the situation could be a little more serious than you think.
There could be a problem with the device’s hardware, creating constant errors and indicating a RAM problem.
You’ll need to perform a Memory diagnostic test to figure that out. One method is to use the SFC scan.
It will assist the Windows system in determining the underlying problem and attempting to cure it by evaluating each and every file in the system and determining its operating conditions, which may assist you in permanently removing the error.
The following are the steps you must take to do this:
- Open the Command Prompt in your device by using the ‘Windows key + R’. Then, in the box that appears after that, write ‘cmd’. Alternatively, you may do this by pressing the Windows key and putting ‘cmd’ into the search box.
- ‘SFC’scannow’ is the command to use.
- Enter the code
- Ascertain that the procedure is completed. Because it’s a long one, you’ll need to be patient. Restart your device after it’s finished.
Hopefully, after doing this, your RAM will be fixed, and everything on your device will be fine, allowing you to resume your job in peace. However, if it does not, it may be necessary to seek professional advice or purchase new equipment. Keep visiting us for other interesting tech articles, Goodbye!